Cisco ARP Commands

  • ARP Commands
  • arp
  • arp dagr
  • arp purge-delay
  • arp timeout
  • clear arp-cache
  • peer (DAGR)
  • priority-timeout
  • proxy-arp
  • route distance
  • route metric
  • show arp
  • show arp dagr
  • show arp traffic
  • timers (DAGR)
  • arp
  • arp dagr
  • arp purge-delay
  • arp timeout
  • clear arp-cache
  • peer (DAGR)
  • priority-timeout
  • proxy-arp
  • route distance
  • route metric
  • show arp
  • show arp dagr
  • show arp traffic
  • timers (DAGR)
  • arpa
  • srp
  • srpa
  • srpb
  • Physical interface instance. Naming notation isย rack/slot/module/portย and a slash between values is required as part of the notation.
  • rack: Chassis number of the rack.
  • slot: Physical slot number of the modular services card or line card.
  • module: Module number. A physical layer interface module (PLIM) is always 0.
  • port: Physical port number of the interface.
  • Virtual interface instance. Number range varies depending on interface type.
  • The target IP address in the ARP request is the same as the interface IP address on which the request is received.
  • The target IP address in the ARP request has a statically configured ARP alias.
  • The target IP address is not on the same physical network (LAN) on which the request is received.
  • The networking device has one or more routes to the target IP address.
  • All of the routes to the target IP address go through interfaces other than the one on which the request is received.
  • Physical interface instance. Naming notation isย rack/slot/module/portย and a slash between values is required as part of the notation.
  • rack: Chassis number of the rack.
  • slot: Physical slot number of the modular services card or line card.
  • module: Module number. A physical layer interface module (PLIM) is always 0.
  • port: Physical port number of the interface.
  • Virtual interface instance. Number range varies depending on interface type.
  • Dynamic
  • Interface
  • Alias
  • Static
  • โ€œ-โ€ (indicates global static and alias entries)
  • Physical interface instance. Naming notation isย rack/slot/module/portย and a slash between values is required as part of the notation.
  • rack: Chassis number of the rack.
  • slot: Physical slot number of the modular services card or line card.
  • module: Module number. A physical layer interface module (PLIM) is always 0.
  • port: Physical port number of the interface.
  • Virtual interface instance. Number range varies depending on interface type.
, ,

Leave a Reply

Your email address will not be published. Required fields are marked *